A Full Set of Battery Safety Test Equipment

This machine applied for battery burning resistance testing. Testing according to standard UL1642 and UL2054.

-Model: BE-8105
-Structure: All-in-one structure, the door uses explosion-proof lock and explosion-proof chain
-Burner: Bunsen burner with inner diameter of 0.375 inch (9.5mm) and length approx. 100mm
-gnition Device: Automatic ignition
-Display Mode: PLC touch + Remote control
-Observation window: 390*360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh)
-Overall Dimension: W940*D780*H1620 mm
-Power Source: AC 220V 50HZ 2.0KW

To test battery safety performance through different hammer and different stress areas from different height. The battery verifies as qualified on the condition of no flames or explosion after this heave impact test. Test specimens is placed on a plane. A bar with its diameter at 15.8mm placed on the central position of test specimens in cross direction. A heavy of 9.1kg drop free from a height of 610mm down to the test specimens. Each test specimen has to bear the impact test and each test need different test specimens.

-Model: BE-8106
-Drop Ball Weight: 9.1kg±0.1kg
-Drop Height 0~770mm（Adjustable)
-Control Mode PLC Touch Screen Control+ Remote Control
-Crossing Bar Diameter: 15.8 mm
-Effective Test Space: W300*D300*H300mm
-Overall Dimension: W940*D780*H1620mm
-Power Supply: AC 220V, 50Hz, 2.0KW

This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for Lithium-ion battery cell safety test that complied with the Japan Industrial standard & relevant clause such as IEC 62133-2017.

-Temperature Range: -10℃ ～ +80℃（Controllable）
-Inner Dimension: W700*H600*D500 mm
-External Dimension: W1000*H1800*D980mm
-Force Range: 200~2000N
-Force Accuracy: ≤±0.5％FS
-Displacement Accuracy: ≤±0.5％FS
-Speed Range: 1~200mm/min
-Effective Range: 200mm (excluding holder)
-Voltage Acquisition: 0—10V, resolution:1mv, frequency≤100Hz, 1 channel
-Temperature Acquisition: 0~850℃, accuracy: ±2.0℃, frequency≤10Hz, 2 channels
-Power Source: AC220V , 50HZ, 5KW

This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary ,CD/MD/MP3 etc. and components free dropping testing.

-Drop Height 300～1500mm(Controllable)
-Display accuracy 0.1mm
-Height deviation ±5mm
-Test Loading: ≤5kg
-Test Space: W200*D200*H200mm
-Drop floor material: Steel plate (marble plate, wooden plate each 1 piece )
-Machine Dimension: W940*D940*H1900mm
-Power Source 220V, 50Hz, 1KW

Mainly applied for industrial products drying, thermal treatment etc.

-Temperature Range: Ambient temperature+10～150℃ (controllable)
-Control Accuracy: ±0.5℃
-Distribute Temp. ±2.0℃ (non-load)
-Temperature rising rate: 5℃ ± 2℃/ minutes (linear settable)
-Control Method: PLC Touch Screen Control
-Working Room Dimension: W600*D500*H780mm
-External Dimension: W940*D1250*H1620mm
-Power Source: 220V 50HZ,single phase, 5KW

This test assesses cell and battery seal integrity and internal electrical connections. The test is conducted using rapid and extreme temperature changes.


-Model: BTKS5-Series
-Temp. Range: -40℃~+150℃ (adjustable)
-Temp. Fluctuation: ≤±0.5℃
-Temp. Deviation: ≤±2.0℃
-Temp. Uniformity: ≤2.0℃
-Temp. Heating Time: From -40℃ to +85 ℃, average 5℃/ min. No load, non-linear;
-Temp. Cooling Time: From +85℃to -40℃, average 5℃/ min. No load, non-linear;
-Cooling Method: Air cooling
-Power Source: AC380V, 50Hz, three phase

This Battery Crush Test Machine is designed to simulate actual using environments for the lithium battery such as battery in crush and feedback the various results in different crushing conditions.


-Force Range: 2-20KN/5-50KN
-Crush Speed: 0.01~15mm/s (Adjustable)
-Driving Method: Electric Servo Drive
-Crush Range: 300mm
-Crush Accuracy: ±0.5%
-Nail Penetration Speed: 1~40mm/s
-Controlling Mode: Computer control
-Effective Test Space: W300*D300*H300mm (Can be customized as required)
-Overall Dimension: W1250*D1150*H1860mm
-Observation Window: 300*300mm explosion-proof glass with explosion-proof membrane
-Power Supply: AC 220V 50HZ

Remote integral battery large current short-circuit test machine is designed to complies with standards at the internal resistance far less than 100mΩ to achieve large short-circuit current. In additional, a load-bearing capacity must be designed in electrical system for short-circuit system. Thus, BELL R&D team selects industrial DC magnetic contact with full copper terminal and internal copper current conduction and internal active bead axial fan is mounted to cool to ensure the test system safer and reduce the test machine power consumption and enable the test data in accuracy.

-Model: BE-8102
-Max. short-circuit current: 400A or 1000A
-Internal Resistance: 80±20 mΩ
-Controlling Mode: PLC touch type (7 inch) + remote control
-Temperature Range: Normal temperature to 80°C or 0-80°C (Optional)
-Inner Dimension: W600*D500*H600mm
-External Dimension: W940*D780*H1620mm